Adhesive Wall-Mounted UV Toothbrush Holder

Organized Toothbrush Storage with an Enclosed UV Function

Keep multiple toothbrushes arranged above the bathroom counter with this compact wall-mounted holder.
The unit combines hanging toothbrush positions, an enclosed ultraviolet treatment function, and
adhesive installation in one space-saving ABS housing.

Important UV Performance Notice

Available product data does not identify the UV wavelength, irradiance, treatment duration,
tested microorganisms, or validated reduction rate. This product must not be described as
providing complete sterilization, medical disinfection, or protection from illness unless
those claims are supported by appropriate independent testing and compliant labeling.

Bathroom Storage Benefits

• Moves toothbrushes away from a crowded or frequently wet countertop.
• Provides separate hanging positions to reduce contact between brush heads.
• Compact horizontal housing fits above many bathroom vanities.
• Available in black and white to coordinate with different bathroom finishes.
• Adhesive installation avoids drilling when used on an approved surface.

Product Details

Installation Guidance

1. Select a smooth, flat, clean, dry, and nonporous wall away from direct shower spray.
2. Confirm that the surface and adhesive components are suitable for the combined weight of the holder and stored items.
3. Remove soap film, dust, oil, and mineral residue without leaving cleaner behind.
4. Apply the supplied mounting component according to the manufacturer’s instructions.
5. Press it firmly against the wall and observe the full specified curing time before attaching or loading the holder.
6. Test the installation with gentle pressure and lightweight items before normal use.
7. Do not install over grout lines, loose tile, wallpaper, textured walls, or damaged surfaces.

Everyday Use

1. Rinse the toothbrush thoroughly to remove toothpaste and visible debris.
2. Shake off excess water before placing the toothbrush in the holder.
3. Position each brush so the head remains separated from neighboring brushes.
4. Operate the UV function only according to the supplied instructions and with all required shields or covers in place.
5. Allow the toothbrush and holder to ventilate and dry between uses.
6. Continue replacing toothbrushes or brush heads at the interval recommended by the toothbrush manufacturer.

Cleaning and Battery Care

• Switch the device off before cleaning it.
• Wipe the exterior with a soft, slightly damp cloth; do not immerse the unit.
• Keep electrical openings, controls, and the battery area dry.
• Remove toothpaste residue and standing moisture regularly.
• Do not use bleach, abrasive pads, strong solvents, or boiling water.
• Use only the charging equipment and electrical specifications approved by the supplier.
• Never charge or operate the device with wet hands or while moisture is present around its electrical connection.

UV and Electrical Safety

• Do not look directly at an illuminated ultraviolet source.
• Do not expose skin or eyes to ultraviolet light from an open, damaged, or modified housing.
• Stop using the product if UV light escapes from an area that should be enclosed.
• Do not bypass switches, covers, sensors, timers, or other safety mechanisms.
• Keep the device away from bathtubs, showers, overflowing sinks, and locations subject to direct splashing.
• Adult supervision is required when the product is used around children.
• Stop use if the unit overheats, develops an unusual odor, becomes discolored, or shows signs of battery swelling or leakage.
• The UV function does not replace rinsing, physical cleaning, drying, or routine toothbrush replacement.