380 mL Touchless Foaming Soap Dispenser

Product Details

What Is Included

• 1 × foaming soap dispenser
• 1 × USB Type-C charging cable
• 1 × user manual
• 2 × adhesive mounting stickers

Choosing Soap

For the simplest and safest refill routine, use a commercially prepared
foaming hand soap that its manufacturer approves for refillable foam
dispensers.

• Do not add thick gel soap directly unless the dispenser manual confirms
  that the viscosity is compatible.
• Do not dilute soap unless the soap manufacturer expressly provides a
  dilution ratio for that product.
• Do not mix different soap products, brands or old and new batches.
• Do not use products containing particles, beads, oils or abrasive
  material that could obstruct the pump.

How to Use

1. Charge the dispenser in a dry location with the supplied cable and a
   compatible 5V/1A power source.
2. Disconnect the cable and close the charging-port cover before filling
   or operating the dispenser.
3. Clean and completely dry the reservoir and fluid path before the first
   use and before each new refill.
4. Add compatible foaming soap without exceeding the maximum fill line,
   then close the reservoir securely.
5. Switch the unit on and select the lowest foam level for the initial test.
6. Place a hand beneath the outlet, then adjust the level if more or less
   foam is required.

Cleaning and Refilling

1. Do not add fresh soap to a partially filled reservoir.
2. Empty the reservoir completely before changing or replenishing soap.
3. Clean all manufacturer-approved removable parts and the pump path
   according to the user manual.
4. Rinse away soap residue and allow the cleaned parts to dry completely
   before refilling.
5. Wipe the exterior with a soft damp cloth. Do not immerse the electronic
   dispenser or allow water into the charging port.