Dual-Outlet Faucet-Mounted Water Filter Attachment

More Control at the Faucet

Add a convenient filtration option to a compatible kitchen or bathroom faucet. This compact attachment uses a selector lever to switch between the cartridge-filtered outlet and regular faucet flow, allowing you to choose the appropriate mode for rinsing produce, washing dishes and everyday cleaning.

Product Details

Installation and Use

1. Confirm that the faucet outlet and included connector are compatible before installation.
2. Remove the existing faucet aerator, then install the appropriate adapter, sealing washer and filter housing.
3. Tighten the connection securely by hand and check for leaks before normal use.
4. Flush a new or replacement cartridge according to the supplied instructions.
5. Use the selector lever to choose filtered flow or regular faucet flow.
6. Replace the cartridge according to its documented service interval or when performance declines.

Care and Safety

• Use only within the listed temperature and water-pressure ranges.
• Do not run hot water above 35°C through the filter cartridge.
• Use only with pre-treated municipal tap water of known quality.
• This attachment is not intended to make microbiologically unsafe or otherwise unknown water safe to drink.
• No direct-drinking or specific contaminant-reduction claim is made unless supported by applicable third-party certification.
• Stop use immediately if the housing, connector or seals become cracked, loose or damaged.
• Clean the exterior with a soft damp cloth; do not use abrasive or corrosive cleaners.

Package Contents

• 1 × faucet filter housing
• 1 × replaceable filter cartridge
• Mounting connector, seals and adapters as supplied