300 mL Touchless Wall-Mounted Foam Soap Dispenser
$40.98
Touch-Free Foam in a Space-Saving Wall-Mounted Design
Keep foaming hand soap conveniently positioned above the sink with this
rechargeable automatic dispenser. Its round wall-mounted housing combines
infrared sensing, three foam output levels and an LED status display with
a 300 mL refillable reservoir.
Touchless Sensor
Place a hand beneath the outlet to activate the supplier-listed
infrared sensor without pressing a manual pump.
Three Output Levels
Select from three supplier-listed foam settings to adjust the amount
dispensed for different handwashing needs.
LED Status Display
The front display is designed to show the selected level, remaining
battery status and a supplier-listed ambient temperature reading.
Type-C Rechargeable
A built-in rechargeable battery supports cordless operation after
charging in a dry location.
Product Details
| Product Type | Rechargeable wall-mounted foaming soap dispenser |
|---|---|
| SKU | OKHG300122 |
| Reservoir Capacity | Supplier-listed 300 mL (approx. 10.1 fl oz) |
| Foam Settings | 3 adjustable output levels |
| Sensor Range | Supplier-listed 3–6 cm (approx. 1.2–2.4 inches) |
| Listed Response Time | Approximately 0.25 seconds |
| Display | Battery status, output level and supplier-listed ambient temperature |
| Battery | Supplier-listed 2000 mAh rechargeable lithium battery |
| Charging Connection | USB Type-C |
| Supplier-Listed Material | Plastic housing with decorative plated trim |
| Available Colors | Elegant white and obsidian black |
| Installation | Wall-mounted; exact mounting system requires confirmation |
| Listed Dimensions | 140 × 140 × 70 mm (approx. 5.5 × 5.5 × 2.8 inches) |
| Listed Weight | 0.89 lb |
Compatible Soap
Use a commercially prepared foaming hand soap that its manufacturer
approves for refillable foam dispensers.
-
Do not fill the reservoir with alcohol-based hand sanitizer unless the
dispenser manufacturer has expressly approved that formulation. -
Do not add thick gel soap directly unless the specified viscosity is
within the dispenser’s supported range. -
Do not dilute soap unless the soap manufacturer provides a compatible
dilution ratio and storage period. -
Avoid soaps containing particles, beads, heavy oils or abrasive
ingredients that could block the pump.
Installation
-
Select a smooth, clean, dry and nonporous wall area that is protected
from direct water spray. -
Clean and dry the surface completely before installing the mounting
plate or adhesive. -
Apply the supplied mounting system according to its instructions and
allow it to cure for the full specified period. -
Attach the empty dispenser and test its stability before filling the
reservoir.
How to Use
-
Charge the dispenser completely in a dry location using the supplied or
manufacturer-approved cable and power source. -
Disconnect the charging cable and close the charging-port cover before
filling or operating the dispenser. -
Clean and dry the reservoir and manufacturer-approved removable parts
before the first fill. -
Add compatible foaming soap without exceeding the maximum fill level,
then close the reservoir securely. -
Switch on the unit and select the lowest foam setting for the initial
test. -
Hold a hand beneath the outlet without touching it, then adjust the
output setting if necessary.
Cleaning and Refilling
- Do not add new soap to a partially filled reservoir.
- Empty the dispenser completely before changing or replenishing soap.
- Clean the reservoir and fluid path according to the manufacturer’s instructions.
- Allow cleaned parts to dry completely before refilling.
- Wipe the exterior with a soft damp cloth only.
- Do not rinse, spray or immerse the electronic housing.
Important Safety Information
- This product is a soap dispenser, not a hand-sanitizer machine or medical device.
- Do not fill it with alcohol, solvent or another flammable liquid unless specifically approved by the manufacturer.
- Never charge, fill or clean the dispenser with wet hands or near an active water source.
- Do not use the unit while it is connected to a charging cable.
- The displayed temperature is informational only and must not be used to determine safe water temperature.
- Stop use if the reservoir leaks or the housing, battery, cable or charging port appears damaged.
- Keep the sensor and charging port dry.
- Keep the dispenser and charging accessories out of reach of unsupervised children.
| Weight | 0.89 lbs |
|---|---|
| Dimensions | 140 × 140 × 70 mm (Approx. 5.5 × 5.5 × 2.8 inches) |
23 reviews for 300 mL Touchless Wall-Mounted Foam Soap Dispenser
Frequently Asked Questions
Find quick answers to common questions about orders, payment, product quality, returns, and shipping.
Does OKHomeGoods support third-party secure payment services or buyer protection channels?
Yes. For customers who prefer additional payment protection, OKHomeGoods supports secure payment methods such as PayPal and major credit card networks. These established payment systems provide buyer protection, dispute-resolution procedures, and refund mechanisms for eligible transactions.
Are your products good quality? Are they carefully selected?
We carefully curate our products through multiple rounds of selection, focusing on attractive design, everyday practicality, useful functionality, and good value for our customers. Product quality is an important part of our selection process. We also regularly publish practical care and maintenance advice on our blog , with new helpful content added regularly.
What is your return policy?
We offer a 30-day hassle-free return policy and cover eligible return shipping costs. If your order arrives damaged or you receive the wrong item, please contact us and our support team will help arrange the appropriate replacement or refund. For complete details, please review our Returns & Refunds Policy .
What shipping methods do you use? Is shipping fast? Do you charge for shipping?
We offer free shipping on all orders, regardless of how many items you purchase. Depending on the destination, product, and fulfillment requirements, orders may be transported using different shipping methods, including air and sea freight. We select the most suitable delivery option for each order. For estimated delivery information and additional details, please visit our Shipping Information page.















R***O –
Parcel arrived somewhat kneaded because the box is made of thin cardboard. However its content is absolutely intact. It is very beautiful.
I didn’t installed and used the soap dispenser yet.
I will post updates as soon as I install and use.
I recommend the seller.
B***r –
I did not receive the order but seller sent me full refund. So 5 stars its the only things I can do. Thank you seller!
J***k –
super
L***g –
Funktioniert wie beschrieben, schneller Versand
R***o –
температуру показує, піну видає. на вигляд – якісно.
V***v –
Very good. I recommend

R***a –
Easy and perfect.
B***I –
가성비 괜찮네요
V***n –
de tres bonne qualiter identique a la photo
n***a –
Bien
A***e –
tutto ok
A***v –
Great stuff – love it.
Y***p –
I was dissatisfied with no tracking info about where the parcel is.
K***v –
супер

s***a –
Funciona perfecto
T***v –
The item looks as described. It came fast. It works fine, but when I filled it with soap I see leakage at the bottom. It leaks when idling, from the hole that the soap foam is coming out. I don’t think it can be rapaired!


A***p –
it is exactly as in the picture.
P***s –
super top. franchement rien a redire et l’autonomie est bonne
N***n –
Nice
H***z –
Works with less thick soap
A***i –
товар пришёл бракованный, не срабатывает когда к нему руку поносить, открыл спор, продавец вернул деньги.
C***n –
nice product i will try it as soon as it will charge. usb connection is type C



O***i –
Заказ быстро приехал. Хорошо упакован выглядит и работает прекрасно. Очень довольна покупкой)