Water-Powered Color-Changing LED Shower Head

Add an Illuminated Accent to Your Shower

Create a colorful shower effect with this fixed LED shower head. According to the supplier,
running water powers the built-in lighting, so the unit does not require replaceable batteries
or an external electrical connection.

Supplier-Listed Light Guide

These thresholds are reproduced from the supplied listing and have not been independently
verified. The page also contains conflicting references to three-color, seven-color and
freely cycling light modes.

Product Details

Installation Guidelines

1. Confirm the shower head’s inlet thread and compatibility with the existing shower arm before installation.
2. Turn off the water and remove the existing shower head according to the fixture manufacturer’s instructions.
3. Inspect the shower arm, washer and sealing surfaces for damage or mineral buildup.
4. Install the correct washer or thread-sealing material only when required by the supplied instructions.
5. Begin by hand-tightening the shower head. Avoid excessive force that could crack or deform the ABS connection.
6. Restore water flow gradually and inspect the connection for leaks before normal use.

Care and Maintenance

• Clean exterior surfaces with a soft cloth, warm water and mild soap.
• Avoid abrasive pads, bleach, acids, ammonia and aggressive descaling products.
• Clear mineral deposits from the spray face without using sharp metal tools.
• Reduced water flow may cause the LEDs to dim, flicker or stop operating.
• Do not disassemble the internal generator or lighting components unless directed by the manufacturer.

Critical Temperature and Safety Notice

The LED colors are visual indicators only. This shower head is not a thermometer, thermostatic
mixing valve or anti-scald safety device, and it does not control the water temperature.

Always test the water manually before bathing, particularly for children, older adults and
anyone with reduced temperature sensitivity. Never rely solely on the displayed light color.

Flow rate, inlet size, pressure units, LED accuracy and plumbing certifications have not been
supplied. Compatibility with local plumbing and water-efficiency requirements must be confirmed.

Stop using the product if it leaks, cracks, becomes loose or produces an unusual sound. The
supplied information does not substantiate the original “pressurized” or “water-saving” claims.